特种车辆舱室送风系统布局仿真优化

特种车辆由于其功能特殊性和封闭性，无法像民用车辆一样利用窗户的开闭来控制舱室通风，长时间驾驶特种车辆，驾驶舱面临空间小、冷源少、热负荷大、缺乏新鲜空气等问题，且外部环境条件复杂。这就要求特种车辆舱室送风系统精细设计，满足人员和多个装置的热舒适和热控需求，因此有必要基于特殊车辆的驾驶舱特点，合理布局并优化通风系统，保证整舱热要求。为了让座舱送风与舱内热源热交换尽量完全，带出更多的热量，首先针对某型特种车辆，建立了典型舱室和乘员的三维物理模型和仿真模型。针对10种送风模式进行了详细的气流组织仿真优化分析，获得了特种车辆舱室多物理场。气流组织优化是从风口形式和送风口位置两方面进行，风口形式优化中提出多种风口组合形式，分别进行仿真。以设备温控、人员热舒适和空气龄等为目标，利用评价函数对仿真结果进行评价，对10种类型的送风工况进行了仿真。从仿真结果中，以上述多优化目标为依据，进一步开展了针对初步优选的送风形式的风口位置优化。在风口形式优化结果的基础上，采用遗传算法，将位置参数设为优化参数，选取两个评估函数作为优化的目标函数，并将头足温差等约束条件设置到优化模型中，对仿真结果进行筛选和逆优化研究，最终得到最优风口位置，完成气流组织优化。研究对于全密封特种车辆的有限空间热舒适性和空气质量研究具有一定意义。     

Simplified anode architecture for PEMFC systems based on alternative fuel feeding: Experimental characterization and optimization for automotive applications

The need to reduce PEMFC systems cost as well as to increase their durability is crucial for their integration in various applications and especially for transport applications. A new simplified architecture of the anode circuit called Alternating Fuel Feeding (AFF) offers to reduce the development costs. Requiring a new stack concept, it combines the simplicity of Dead-End Anode (DEA) with the operation advantages of the hydrogen recirculation. The three architectures (DEA, recirculation and AFF) are compared in terms of performance on a 5-kW test bench in automotive conditions, through a sensitivity analysis. A gain of 17% on the system efficiency is observed when switching from DEA to AFF. Moreover, similar performances are obtained both for AFF and for recirculation after an accurate optimization of the AFF tuning parameters. Based on DoE data, a gain of 25% on the weight of the anodic line has been identified compared to pulsed ejector architecture and 43% with the classic recirculation architecture with blower only (Miraï).     

Annual and regional variations of aflatoxin B1 levels seen in grains and feed coming from Croatian dairy farms over a 5-year period

The aim of the study was to investigate annual and regional differences in the level of aflatoxin B₁ (AFB₁) in grains and dairy cattle feed. Maize (n = 972), wheat (n = 201), barley (n = 147), oat (n = 136), grain mixtures (n = 168), and dairy cattle feed (n = 325) were sampled from 2009 to 2013 on different farms and in different farm factories situated in four Croatian regions. The samples were analysed for AFB₁ using the validated ELISA immunoassay. AFB₁ was determined in 16.4% of all investigated samples, among which maize was proven to be the most contaminated, with 21.7% of the samples recovered during 2013 harbouring AFB₁ in concentrations over the permissible ones. Levels higher than permitted were observed in 17.9% and 12.3% of grain mixtures and dairy cattle feed, respectively, whereas concentrations of AFB₁ determined in other crops throughout the investigated period met the stipulated requirements. The results revealed the AFB₁ occurrence to be significantly (p < 0.05) dependent on the cultivation region, with the highest levels generally found in maize harvested in 2013 and consequently in grain mixtures and cattle feed that can most likely be associated with climatic conditions as the most critical factor for mould formation, and thus also AFB₁ production.     

An experimental approach towards increasing mechanical durability of extruded fish feed in the drying process

Mechanical durability of extruded fish feed must be optimized to lower economic losses as well as emission of organic matter to aquatic environments. The glass transition hypothesis for viscoelastic biopolymers is demonstrated and confirmed experimentally to be valid for extruded fish feed pellets. It is proposed and demonstrated that it is important to avoid early glass transition onset, to optimize the obtained mechanical durability. From the proposed glass transition hypothesis, immediate process relevance to the pre-drying transport mechanism is demonstrated. Furthermore, measured mechanical durability is found to range from 1.5 to 5.0% loss, for different combinations of drying parameters.     

Morphology of Flashing Feeds at Critical Fluid Properties in Larger Pipes

Tailored conditioning and control of flashing feeds in industrial applications requires knowledge of the evolving flow morphology and phase fractions along the feed pipe. Design methods obtained from reference systems (e.g. water-air) are hardly applicable for commercial scales and critical fluid properties (e.g. high vapor densities, low surface tension). In this study, the flow morphology of flashing feeds in a novel refrigerant test rig at critical fluid properties was analyzed using wire-mesh sensors at two locations along the feed pipe and experimental data from the water-air system.     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Determination of olaquindox,carbadox and cyadox in animal feeds by ultra-performance liquid chromatography tandem mass spectrometry

Olaquindox, carbadox, and cyadox are chemically synthesised antibacterial and growth-promoting agents for animals. At high doses they may exert mutagenicity and hepatic and adrenal toxicities in animals. Regrettably, these substances are frequently abused or misused when added into animal feeds. Thus, developing a sensitive and reliable method for simultaneous determination of olaquindox, carbadox, and cyadox in different kinds of animal feeds is crucially important for food safety monitoring. In this paper we optimised instrumental conditions, extraction solvents, solid phase extraction cartridges, and pH of the loading solvents on the Oasis HLB cartridge. Under the optimal conditions, mean recoveries ranged from 74.1 to 111%, and intra-day and inter-day variations were lower than 14.6% and 10.8%, respectively. The limits of quantification for olaquindox, carbadox, and cyadox were 0.05 mg kg^?1, 0.10 mg kg^?1, and 0.025 mg kg^?1, respectively. The proposed method uses ultra-performance liquid chromatography tandem mass spectrometry and is sensitive and reliable for the simultaneous determination of olaquindox, carbadox, and cyadox in three kinds of animal feeds (specifically, mixed feed, concentrated feed, and additive premixed feed). This method has good precision, high sensitivity, and good reproducibility, and thus it can be used for convenient and accurate determination of olaquindox, carbadox, and cyadox in different kinds of animal feeds.     

Recent Advances in Microalgal Bioactives for Food,Feed, and Healthcare Products: Commercial Potential,Market Space,and Sustainability

To combat food scarcity as well as to ensure nutritional food supply for sustainable living of increasing population, microalgae are considered as innovative sources for adequate nutrition. Currently, the dried biomass, various carotenoids, phycocyanin, phycoerythrin, omega fatty acids, and enzymes are being used as food additives, food coloring agents, and food supplements. Apart from nutritional importance, microalgae are finding the place in the market as “functional foods.” When compared to the total market size of food and feed products derived from all the possible sources, the market portfolio of microalgae‐based products is still smaller, but increasing steadily. On the other hand, the genetic modification of microalgae for enhanced production of commercially important metabolites holds a great potential. However, the success of commercial application of genetically modified (GM) algae will be defined by their safety to human health and environment. In view of this, the present study attempts to highlight the industrially important microalgal metabolites, their production, and application in food, feed, nutraceuticals, pharmaceuticals, and cosmeceuticals. The current and future market trends for microalgal products have been thoroughly discussed. Importantly, the safety pertaining to microalgae cultivation and consumption, and regulatory issues for GM microalgae have also been covered.     

Genetic parameters of forage dry matter intake and milk produced from forage in Swedish Red and Holstein dairy cows

High-yielding dairy cows are often fed high proportions of cereal grain and pulses. For several reasons, it would be desirable to replace these feed sources with forage, which is not suitable for human consumption. Feeding large amounts of forage to dairy cows could also make dairy production more publicly acceptable in the future. In this study, we estimated genetic parameters for total dry matter intake (DMI), DMI from forage (DMI_For), energy-corrected milk (ECM), and ECM produced from forage (ECM_For). A total of 1,177 lactations from 575 cows of Swedish Red (SR) and Holstein (HOL) dairy breeds were included in the study. Mixed linear animal random regression models were used, with fixed effect of calving season and lactation week nested within parity 1 and 2+, fixed effect of calving year, and random regression coefficients for breeding value (up to linear) and permanent environmental effect (up to quadratic) of the cow. Heritability for DMI and DMI_For was generally higher for HOL than for SR in all-parity data and in later parities; however, the opposite was true for first parity. Heritability for DMI and DMI_For during the first 8 wk averaged 0.11 and 0.15, respectively, in all-parity data for the 2 breeds. Corresponding values for ECM_For and ECM were 0.21 and 0.29, respectively. In first parity, values were 0.32, 0.36, 0.28, and 0.51, respectively. The genetic correlation between DMI and DMI_For was high, above 0.83, and fairly constant across the lactation. The genetic correlation between ECM_For and ECM was close to unity in the later part of lactation for both breeds, but was around 0.8 in the early lactation for both breeds; it decreased for HOL to 0.54 in wk 17. The genetic correlations between DMI and ECM_For and between DMI_For and ECM_For were low and negative for HOL (absolute value ～0.2–0.3), but changed for SR from weakly positive in early lactation to negative values and back to positive toward the end of lactation. For most traits, the correlation between wk 1 and wk 8 into the lactation was very high; the lowest value was for DMI in HOL at 0.81. The genetic correlation between parities was rather high in the first part of the lactation. During the first 8 wk, the correlation was lower for HOL than for SR, except for ECM. We found that DMI_For and ECM_For showed reasonably large heritability, and future work should explore the possibility of genomic evaluations.     

马铃薯渣综合利用研究现状及进展

马铃薯渣是马铃薯淀粉加工产业的一种副产物,常被作为垃圾废弃掉,造成资源浪费和环境污染。实际上,马铃薯渣中含有许多有价值的成分,具有被开发利用的潜力。目前,马铃薯渣的综合利用主要集中在以下几方面:提取膳食纤维和果胶;制备高蛋白高能量饲料;制备新型黏合剂、胶黏剂和吸附材料;制备燃料酒精、生物质混合燃料和能量气体;制备种曲、醋、酱油及可食性膜等。综述了马铃薯渣目前综合利用的研究现状及进展。